|Mike Brattland's 1938 Willys Pickup Build Pictures / Picture 657
The pedals are the pedals which I
constructed which ride on the Neal Products alum mount below the floor boards.
The pedal arms are shaped and strengthened for the very short distance between
the driver and the pedals since the firewall sits a full 9 1/2 inches back from
the stock Willys firewall inorder to accommodate the Ford motor. The pedal pads
are stock Willys. The seat is a much modified 85 Dodge D-50 Mini Truck bench
seat, with a shortened back and modified shifter clearance.