Mike Brattland's 1938 Willys Pickup Build Pictures / Picture 650

Picture 650

When it was finally "basically" together so it could be started, I merely hooked the wires up in a basic fashion...not cutting them...you can also see it was without firewall....infact once I fired the motor for the first time(1999), I drove it for nearly three months without a firewall and a string for a throttle, before getting the firewall in and a convention gas pedal installed. the seat frame is the original oak Willys seat frame with some pillows which I used till I found and modified the 85 Dodge D-50 mini truck bench seat.

Picture 650.jpg